Map of Gloucester County, NJ, an area served by Pro 1 Chimney
Chimney Liners, Gloucester County

Your Local Chimney Relining Team in Gloucester County, NJ

In Gloucester County the most common reason a chimney needs a liner is a heating change. A homeowner replaces an old boiler or furnace with a more efficient unit, and the existing flue is now too big for it. The cooler exhaust condenses on the tile, draft suffers, and the masonry starts to soak up moisture. Older homes may also have tile liners that have simply cracked with age. Our crew measures the flue and installs a liner sized to the appliance, then checks the draft.

Open 24 hours, Sunday to Friday. Free written estimates.

Gloucester County, NJ

Chimney Liners for Gloucester County Homes

Gas heats about 78% of Gloucester County's occupied homes and fuel oil about 9%, by Census estimates for 2024. Gas flues run wet as water vapor condenses on cool liner walls, while oil flues collect soot and scale, and both kinds of wear eventually show in the liner.

Census estimates for 2024 put about 13% of Gloucester County homes before 1940, with steady building from the 1970s onward. Many chimneys are now at the age when original liners need attention, whether they are clay tile or early metal.

We install liners in West Deptford, Deptford, Glassboro, Washington Township and Woodbury.

When to Call Us

  • Cracked or missing flue tiles
  • You are adding a stove or insert
  • Your boiler or water heater was replaced
  • Pieces of tile in the firebox
  • Draft problems you cannot explain

How the Job Goes

  1. Check the flue

    We find the size and condition of the flue and what is venting into it.

  2. Size the liner

    The liner is sized to the appliance it serves, not just to the chimney.

  3. Install

    A stainless steel liner is run from the top and connected at the bottom.

  4. Cap and test

    We cap the top and confirm the draft before we leave.

Chimney Liners Questions in Gloucester County

Do I need a new liner when switching from oil to gas?
Often, yes. Gas exhaust is cooler and wetter than oil exhaust, and an old flue sized for an oil boiler can be too large for a gas furnace. A liner sized to the new unit protects the chimney and helps it draft.
Can you reline a chimney that serves both a fireplace and a furnace?
Yes, as long as each appliance has its own flue. We line the furnace flue to suit the furnace and the fireplace flue to suit the fireplace, since they handle very different exhaust.
Why does the liner size matter?
A flue that is too big or too small for the appliance can draft poorly and build up deposits. The appliance maker states what it needs.

More about chimney liners, or see all our work in Gloucester County.

Tall brick chimney with a capSAVE$500 OFFANY SERVICE

Limited time offer

$500 OFF

Any chimney service. Mention it when you call or book online.

Mason working on a brick building from a lift
18,000+ projects completed by our own crew

Simple from the first call

How It Works

  1. Your callCall, text or book online

    Tell us what you see or smell. A real person from our team answers and sets a time that suits you.

  2. The visitFree chimney inspection

    Our own crew arrives in a marked Pro 1 van, covers the floor and inspects the chimney from the firebox to the cap, free of charge.

  3. The estimateFree written estimate

    We walk you through what we found, in plain words, and put any repair in writing before work starts.

  4. The workThe job, done right

    We do the work, clean up the roof, the yard and the room, and walk you through the finished job.

Book before the holidays. Fireplaces get their heaviest use from Thanksgiving to New Year. A free inspection now catches nests, creosote and cracked flue tiles before the first big fire and the family gatherings.

Book My Free Inspection

Free Estimate in Gloucester County

Leave your details and our local team calls you back to set a time.

Chimney Liners in Gloucester County

(844) 468-2410Book Online
Text us