Map of Staten Island, NY, an area served by Pro 1 Chimney
Chimney Liners, Staten Island

Your Local Chimney Liners Crew in Staten Island, NY

Staten Island is strongly gas-heated: Census estimates put utility gas at about 87% of occupied homes and fuel oil at about 3%. A gas appliance vents cooler, wetter exhaust than wood or oil, and in a masonry flue that is too big or unlined the moisture condenses and slowly breaks down mortar and clay tile. That makes the liner one of the most important parts of a chimney here. Our local crew checks the flue size against the appliance and installs a stainless liner sized to vent it safely.

Open 24 hours, Sunday to Friday. Free written estimates.

Staten Island, NY

Chimney Liners for Staten Island Homes

After the Verrazzano-Narrows Bridge opened in 1964, Eltingville saw large-scale new home building on former farmland. Chimneys from that boom were built for the furnaces of the time, and many now serve smaller, high-efficiency units that need a narrower liner.

Much of Annadale's woodland was cleared for new homes during the last 30 years of the 1900s. Those chimneys are newer, but replacing the original furnace with a more efficient model can still leave the flue oversized and in need of a liner.

Our crew installs liners in Eltingville, Annadale, Great Kills, New Dorp and Port Richmond.

When to Call Us

  • Cracked or missing flue tiles
  • You are adding a stove or insert
  • Your boiler or water heater was replaced
  • Pieces of tile in the firebox
  • Draft problems you cannot explain

How the Job Goes

  1. Check the flue

    We find the size and condition of the flue and what is venting into it.

  2. Size the liner

    The liner is sized to the appliance it serves, not just to the chimney.

  3. Install

    A stainless steel liner is run from the top and connected at the bottom.

  4. Cap and test

    We cap the top and confirm the draft before we leave.

Chimney Liners Questions in Staten Island

What are signs that my Staten Island chimney liner is failing?
Look for bits of clay tile in the cleanout, a rusty furnace connector, a musty odor near the chimney or damp patches on its inside walls. An inspection will show whether the liner is cracked, collapsed or simply the wrong size.
Is a stainless steel liner a good choice for a gas furnace?
Yes, for most homes. A stainless liner sized to the furnace handles the moisture in gas exhaust and keeps the draft steady. It is installed from the roof without opening walls in most chimneys.
Why does the liner size matter?
A flue that is too big or too small for the appliance can draft poorly and build up deposits. The appliance maker states what it needs.

More about chimney liners, or see all our work in Staten Island.

Tall brick chimney with a capSAVE$500 OFFANY SERVICE

Limited time offer

$500 OFF

Any chimney service. Mention it when you call or book online.

Mason working on a brick building from a lift
18,000+ projects completed by our own crew

Simple from the first call

How It Works

  1. Your callCall, text or book online

    Tell us what you see or smell. A real person from our team answers and sets a time that suits you.

  2. The visitFree chimney inspection

    Our own crew arrives in a marked Pro 1 van, covers the floor and inspects the chimney from the firebox to the cap, free of charge.

  3. The estimateFree written estimate

    We walk you through what we found, in plain words, and put any repair in writing before work starts.

  4. The workThe job, done right

    We do the work, clean up the roof, the yard and the room, and walk you through the finished job.

Book before the holidays. Fireplaces get their heaviest use from Thanksgiving to New Year. A free inspection now catches nests, creosote and cracked flue tiles before the first big fire and the family gatherings.

Book My Free Inspection

Free Estimate in Staten Island

Leave your details and our local team calls you back to set a time.

Chimney Liners in Staten Island

(844) 468-2410Book Online
Text us