Map of Chester County, PA, an area served by Pro 1 Chimney
Chimney Liners, Chester County

Your Local Chimney Liner Installers in Chester County, PA

Putting a wood or pellet stove or an insert into an old Chester County fireplace can make it far more useful, but the chimney has to match. The flue of an old fireplace is usually much larger than a stove needs, and a stove venting into it drafts poorly and builds creosote fast. A properly sized stainless liner running the full height of the chimney is the usual answer. We measure the flue, size the liner to the stove or furnace, connect it and cap it, so the system vents the way it should.

Open 24 hours, Sunday to Friday. Free written estimates.

Chester County, PA

Chimney Liners for Chester County Homes

Downingtown was settled in 1716 and was first called Milltown for the mills along the East Branch Brandywine Creek. Chimneys in houses that old were built for open fires, and adding a full-height liner is what lets them serve a stove or insert safely.

Kennett Square was incorporated in the 1850s and takes the Square in its name from William Penn's original one-square-mile land grant. Older houses in the borough often have unlined or tile-lined flues that need relining before a new furnace or stove goes in.

We install chimney liners in Downingtown, Kennett Square, Coatesville, Phoenixville, Tredyffrin and West Chester.

When to Call Us

  • Cracked or missing flue tiles
  • You are adding a stove or insert
  • Your boiler or water heater was replaced
  • Pieces of tile in the firebox
  • Draft problems you cannot explain

How the Job Goes

  1. Check the flue

    We find the size and condition of the flue and what is venting into it.

  2. Size the liner

    The liner is sized to the appliance it serves, not just to the chimney.

  3. Install

    A stainless steel liner is run from the top and connected at the bottom.

  4. Cap and test

    We cap the top and confirm the draft before we leave.

Chimney Liners Questions in Chester County

Can I vent a pellet stove into my existing chimney?
Yes, with a liner sized for the pellet stove running up the chimney. Pellet exhaust can be corrosive and the vent is small, so venting into a large open flue without a liner leads to poor draft and buildup.
Do you install liners for oil and gas furnaces too?
Yes. Older masonry flues are often too large for today's furnaces and boilers, and exhaust condenses inside them. We fit a stainless liner sized to the appliance so it vents properly and the masonry stays dry.
Why does the liner size matter?
A flue that is too big or too small for the appliance can draft poorly and build up deposits. The appliance maker states what it needs.

More about chimney liners, or see all our work in Chester County.

Tall brick chimney with a capSAVE$500 OFFANY SERVICE

Limited time offer

$500 OFF

Any chimney service. Mention it when you call or book online.

Mason working on a brick building from a lift
18,000+ projects completed by our own crew

Simple from the first call

How It Works

  1. Your callCall, text or book online

    Tell us what you see or smell. A real person from our team answers and sets a time that suits you.

  2. The visitFree chimney inspection

    Our own crew arrives in a marked Pro 1 van, covers the floor and inspects the chimney from the firebox to the cap, free of charge.

  3. The estimateFree written estimate

    We walk you through what we found, in plain words, and put any repair in writing before work starts.

  4. The workThe job, done right

    We do the work, clean up the roof, the yard and the room, and walk you through the finished job.

Book before the holidays. Fireplaces get their heaviest use from Thanksgiving to New Year. A free inspection now catches nests, creosote and cracked flue tiles before the first big fire and the family gatherings.

Book My Free Inspection

Free Estimate in Chester County

Leave your details and our local team calls you back to set a time.

Chimney Liners in Chester County

(844) 468-2410Book Online
Text us